absoluteBLACK, GRAPHENpads Disc 27, Shimano MTB pads, for Shimano XTR (4-piston) and other models, straight cooling fin cut structure, MTB graphene friction compound for endurance

Compatibility
Shimano XTR BR-M9120, XT BR-M8120,BR-M8020, SLX BR-M7120, DEORE BR-M6120,BR-MT420, SAINT BR-M820,BR-M810, ZEE BR-M640, BR-MT520, TRP Quadiem, Quadiem SL, Slate T4, Tektro HD-M750, HD-M745, HD-M735, HD-E725

INSTALLATION - Step by step instructions
Please run in the pads to achieve a proper braking experience. This is a CRUCIAL part of any brake pad installation. Neglecting this step will result in sub-par performance.

Remove the wheel and old brake pads.Use a brake cleaner to clean the inside of the caliper and the rotor surface (alternatively use isopropyl alcohol).Gently push each piston back into the caliper body (e.g. with a large screwdriver). Then fit new pads and springsMost important part - While riding in a safe environment at around 20 km/h, apply the brakes evenly until the speed drops to walking pace. Repeat 20 times. Then stop aggressively 10 times.

For more detailed instructions, please watch the video

But graphene is used in ultra-low friction lubricants ...
To understand why graphene is such a good material for friction materials, you need to understand how friction materials are made. A typical organic friction material comprises five classes of components:

a fibrous material of inorganic/organic/metallic fibers (such as copper),a binder (such as thermoset polymer),a "filler" (various soft ceramic powders),one or more lubricants/friction modifiers (such as graphite, copper),one or more abrasives (hard ceramic powders).

The binder, which is typically a phenolic resin that binds all the components together, has a very high coefficient of friction, so it is necessary to add friction modifiers/lubricants to lower the coefficient of friction and allow for brake modulation. Copper is a great example of a material that not only acts as a fiber material, but also as a lubricant and heat conductor to the backplate. Graphene, on the other hand, is many times stronger than copper, conducts heat 3-6 times better and its coefficient of friction is several orders of magnitude lower. By eliminating copper and finding the right balance between graphene and other components, we have created a unique friction material that offers exceptional performance.