The Shimano BR-MT410 disc brake for all-mountain and trekking use consists of a 2-piston brake calliper and a reach-adjustable 2-finger brake lever made of aluminum. The brake lever is mounted on the handlebars with a split clamp, which can also be combined with a matching I-Spec EV shifter. Funnel bleeding and one-way bleeding technology, which prevents air bubbles from remaining in the brake calliper, make maintenance easier for you. As a J-Kit, this brake is supplied in such a way that you can install it easily, even if the brake line is to be routed internally.
Features:
Brake calliper:
2-piston model with long service life and performance
First-class response behavior
quick piston return
quick, easy installation and maintenance
Piston made of synthetic resin
painted
steel fixing screws (5 mm)
Brake lever:
intuitive operation and high braking force
faster brake response with shorter free travel
Additional contact point enables stiffer lever
I-Spec-EV compatible: 10-degree rotation angle for compatible shifter
Funnel bleed with M5 funnel
Anodized lever, painted housing
Stainless steel clamping screw
Technologies:
I-Spec EV
I-Spec EV describes a variant of the connection between the brake lever and shift lever on MTB drivetrains from Shimano. This type of mounting makes it possible to adjust the shifter both horizontally and vertically in relation to the brake lever and ensures a tidy cockpit as it reduces the number of clamps required. I-Spec EV offers a significantly larger adjustment range compared to I-Spec and I-Spec II. 14 mm adjustment travel in the longitudinal direction and up to 60° rotation enable optimum ergonomic adjustment to your riding style, riding position and anatomy.
One-way bleeding
One-way bleeding is a technology that is used on Shimano brake callipers and makes it easier to bleed the brakes. The line paths have been optimized so that no more air bubbles remain in the brake caliper. In combination with the funnel, the brake can be bled cleanly and easily.
J-Kit
J-Kit is a simple line connection system for hydraulic brakes from Shimano so that you can install your brakes quickly and easily. The brake hose is not yet fitted to the brake in the scope of delivery to facilitate installation in the frame. The J-Kit brake hose is already filled with oil and sealed with a thin membrane. There is a small pin in the J-Kit brake lever that pierces this membrane during installation so that the oil can flow.
Scope of delivery:
1 x Shimano BR-MT410 + BL-M4100 disc brake, VR or HR
1 x Shimano SM-BH59-JK-SS brake hose 1000 mm (VR) or 1700 mm (HR)
1 pair of Shimano Resin brake pads
1 x insert pin
1 x olive
2 x brake caliper mounting bolt
1 x snap ring
Field of application | MTB, E-bike |
Number of brake pistons | 2 x |
Brake calliper mount | post mount |
Coating/carrier | Synthetic resin without plates |
Brake lever | BL-M4100 |
Brake hose | 1700 mm |
brake caliper | BR-MT410 |
Recommended brake fluid | Shimano mineral oil |
Recommended brake hose | SM-BH59-JK-SS |
color | black |
Brake lever size | 2-finger |
groupset | Various |
I-Spec version | I-SPEC EV |
Abbreviation | BL-M4100 / BR-MT410 |
Part no. | EMT4101JRRXRA170 |
Model year | 2021 |
Mounting | rear, lever right |
Mounting type | post mount |
Product type | Disc brake set |
Technologies | One way bleeding |
Brake type | Hydraulic disc brake |