Tube in, sealant in! With the TSI-1 sealant injector from Park Tool, the installation and maintenance of a tubeless system can be so simple and clean.
The regular filling with sealant is done in a few minutes with the filling syringe without much effort.
Fast, precise and spill-free.
And the Park Tool filling set does not require any special valve inserts or hose fittings.
Even when checking or removing existing sealant from the tires, the tires can remain on the rim.
Your bike requires valves with a removable valve insert, as is the case with standard Sclaverand, Dunlop and car valves as well as special tubeless valves.
This must be removed so that the thin inflation hose can be inserted inside the tire.
This can be done quickly with a valve wrench.
Use the handy dosing syringe to fill in the correct amount of sealant, which you have previously drawn accurately from the sealant bottle.
Filling works best when the valve is not at the bottom.
You can use the scale on the transparent lifting cylinder to accurately read the filling quantity up to 100 ml.
This is enough for a single fill-up of fat MTB tires.
Screw the valve core back in, inflate, swivel the tire, done.
The subsequent fill level check or replacement of the tire sealant is carried out in the same way, whereby the sealing milk in the tire is sucked out through the valve in the 6 o'clock position with the stable filling syringe, checked and refilled or replaced.
Without removing the tire bead from the rim, of course.
No more mess when fitting tires, full control for drip-free filling and refilling of tire sealant on tubeless bicycle tires.
With the Park Tool TSI-1 Tubeless Sealant Injector, everything is easy!
Details:
Very high-quality tubeless inflation kit
Sturdy plastic filling syringe with injector hose (screwed)
Ergonomic two-finger grip and wide piston handle
Fits many common bicycle valves with removable valve core
For tubeless systems with SV valve (Presta, French valve), AV valve (Schrader), DV valve (Blitz valve)
Injector syringe can also be used for suction
Hose dimensions: approx. 120 x 3.5 mm Ø
Ideal for low-viscosity sealants for quick filling
Max. Filling quantity: approx. 100 ml
Scale with indication of milliliters and liquid ounces
Filling tool is easy to clean and can be used multiple times
Inject sealant via valve stem
Plastic syringe with 100 cl capacity
120 mm long plastic tip
