delivery from Switzerland over 50 000 articles fast shipping 14 days return policy
Dynaplug Air tubeless MTB repair kit, blue

From Unit price / pcs
2 78.70 CHF *
4 77.10 CHF *
8 76.30 CHF *
80.30 CHF
incl. 8,1% VAT
Item currently out of stock
Description
Description

Dynaplug Air, a complete solution for tire repair including re-inflation! There is no faster way to continue your tour after a puncture than with the Dynaplug Air! Dynaplug is the quickest and easiest way to repair a tubeless tire on the road. Simply remove whatever caused the hole in your tire, push the Dynaplug insert tube directly into the hole and pull it out again to place the repair pin in the tire - done! The air system has an additional highlight. If your tire has lost too much pressure, simply activate the CO2 cartridge to re-inflate the tire before pulling out the insertion tube to insert the tubeless repair pin, so you are ready to ride again in seconds. The sealant-friendly repair plugs are made of a unique viscoelastic, impregnated rubber that bonds instantly and permanently to the tire, and the abrasion-resistant brass tip will not scratch the rim or puncture the rim tape. There is no need to remove the tire, no messy glue or solvent is needed, just slip it on and ride! The end of the repair pins can be cut off later if they bother you. Simply cut them to a length of about 4 mm, depending on their position. The long MTB version of the Dynaplug Air is designed to ensure that the CO2 vents reach far into the tire, even with aggressive treads. For 35c or smaller road tires, use the ROAD Air version with a shorter insertion tube. The set consists of a precision machined air valve body, a stainless steel repair nozzle/introducer tube, 4 standard soft nose tubeless repair pins, a pipe brush to prepare the introducer tubes for recharging and a storage bag. The set also includes an air hose for inflating with CO2 if you only need to fill air through the valve. Made in the USA with patented technology.

Safety notice:
CO2 can be dangerous, please read the operating instructions completely and wear gloves and eye protection, it is also a good idea to try out the air system at home before using it on tour for the first time.

Scope of delivery:

1 x Air MTB insertion tool with CO2 activator
1 x stainless steel insertion tube with air outlet
4 x standard soft nose tubeless repair pins
2 x CO2 cartridges 16g

1 x air hose

1 x Dynaplug neoprene carrying bag
1 x pipe brush

CO2 cartridge not included!

Loading ...