77designz, Chain Guide, Chain Guides Sets, FREESOLO™-ISCG05-38

Product information 'FREESOLO-ISCG05-38'The Freesolo V2 chain guide with its wide range of applications from Cross Country to Enduro and DH is a real all-rounder and still the lightest and fully adjustable chain device on the market. As with our Crash-Plate, the chain guide can be installed without dismounting the crank and all you need is a Torx 25 and something to measure. The CNC milled scale makes it easy to adjust the chainring size, and the adjustment of the chain lines is done with a table and spacers. The 'Front Flip Technology' allows you to remove the chain without tools in case of an incident on the trail, or to pull off the crank from the bottom bracket during a service without having to disassemble the chain guide. The versions marked with the 38 have a chainring adjustment range of 28-38 teeth.FEATURES:Install without crank removalTorx 25 only single tool installationBoost compatibleIncredible LightFront Flip technology for tool free serviceOpen cage for better mud releaseSPECS:Mount: ISCG 05Capacity: 28-38T RoundChainline: 48-53 mm (Boost Ready)Compatibility: 1x10, 1x11 or 1x12 drivetrainBackplate: AL 7075 T6 Black AnodizedSlider: PA66 GF 10 (Front Flip Technology)Hardware: Torx 25 Hollow BoltsWeight: 22 gram (incl. mounting hardware)INCLUDES:Chainline Spacer Set2x M6x11 Hollow Bolts77designz StickerInstallation with Crash Plate:To mount our ISCG 05 models with the Crash Plate you need the Connector. Information:!!! Not compatible with Bionicon and Garbaruk non boost chain rings (30T / 28T / 26T) due to smaller Chain Line !!!!!! The FREESOLO also works with 1*10 drives if you have a clutch rear derailleur and a narrow / wide chain ring !!!The chain guide's upper fastening screw touches the frame on the Propain Tyee from 2020 and Hugene from 2021 models. The upper fastening screw is too long and scratches the frame when the rear triangle moves. Please use a shorter screw.